Lgs
Lgs container flat, 2 axles
L — Flat, special, independent wheels
Two-axle container flat. Takes a single 20ft unit; used where traffic does not justify a bogie wagon.
Specification
- Tare
- 13 t
- Payload
- 27 t
- Gross on rail
- 40 t
- Axle load
- 20 t
- Axles
- 2
- Over buffers
- 13.86 m
- Deck height
- 1180 mm
- Max speed
- 120 km/h
How many fit in a train
The binding limit is usually the shortest passing loop on the route, not the locomotive.
- European norm
- 39 wagons
- 550 m train · 1053 t payload
- TEN-T corridor
- 53 wagons
- 740 m train · 1431 t payload
- Extended
- 60 wagons
- 835 m train · 1620 t payload
Worked example.540 t needs 20 × Lgs, only 51% of a 550 m train (39 wagons). A block train at this volume means paying to haul empty space — the path and the locomotive cost the same whether the train is full or not. Wagonload consolidates your wagons with other traffic, at a higher per-tonne rate but no volume commitment, and adds 1–4 days of marshalling dwell.
Loading gauge clearance
Whether a load clears the tunnels and bridges, on this wagon's 1180 mm deck. This is not track gauge — see the track gauge checker for whether the wheels can run on a given network.
| Load | W6A 3965 | W8 3965 | W10 4020 | W12 4020 | GA 4280 | GB 4320 | GB1 4320 | GC 4650 | 1-T 5300 | plate-c 4724 | plate-f 5182 | plate-h 6147 | sa-cape 3965 | dfc 7100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 40ft standard (8'6") 3771 mm total | ✓+194 | ✓+194 | ✓+249 | ✓+249 | ✓+509 | ✓+549 | ✓+549 | ✓+879 | ✓+1529 | ✓+953 | ✓+1411 | ✓+2376 | ✓+194 | ✓+3329 |
| High-cube (9'6") 4076 mm total | ✗-111 | ✗-111 | ✗-56 | ✗-56 | ✓+204 | ✓+244 | ✓+244 | ✓+574 | ✓+1224 | ✓+648 | ✓+1106 | ✓+2071 | ✗-111 | ✓+3024 |
| Swap body 3850 mm total | ✓+115 | ✓+115 | ✓+170 | ✓+170 | ✓+430 | ✓+470 | ✓+470 | ✓+800 | ✓+1450 | ✓+874 | ✓+1332 | ✓+2297 | ✓+115 | ✓+3250 |
| P400 semi-trailer 5180 mm total | ✗-1215 | ✗-1215 | ✗-1160 | ✗-1160 | ✗-900 | ✗-860 | ✗-860 | ✗-530 | ✓+120 | ✗-456 | ✓+2 | ✓+967 | ✗-1215 | ✓+1920 |
Margins in millimetres. A load clearing by less than 50 mm needs the operator to confirm the specific path before booking.